For the heart of any continuous casting system, copper mold tubes are essential. In the past, our customers have had to choose from a limited amount of suppliers. We can now offer an ISO9000 qualified alternative. We are dealing with the largest mold producer in China who has had much success with exporting material to 16 countries. This success has caused our competitors to already visit them to try and set up a joint venture.

 

This business is as simple as obtaining a drawing and determining the current quality they use.

 

If further technical information is needed, we can draw on our in-house experts or rely on our suppliers' 25 technicians. We look forward to receiving your inquiries.

 

There are 3 different qualities we can offer which covers a majority of the application in the USA and Canada

Phosphorous Deoxidized Copper (Cu DHP)

Used as the basic material for many applications. Used when the thermal flow is moderate and the thickness of the mold is not excessive. Used mainly for casting billets.

Silver Bearing Copper (Cu Ag)

When there are considerations for higher temperatures in the mold, a high thermal  flow and thicker mold walls, this quality is an alternative. Used for casting billets in special operation conditions, such as high casting speeds, poor cooling conditions and sequential castings. Also used for casting blooms and slabs.

Copper-Chromium-Zirconium (Cu-Cr-Zr)

Able to hold its hardness at much higher temperature ranges and also maintains the thermal conductivity essential to the performance of this product. The premium choice.